Published date: 19 July 2021

Closed opportunity - This means that the contract is currently closed. The buying department may be considering suppliers that have already applied, or no suitable offers were made.


Closing: 26 July 2021, 11pm

Contract summary

Industry

  • Machinery for mining, quarrying, construction equipment - 43000000

Location of contract

England

Value of contract

£45,000

Procurement reference

RHINOCOREBOX 1.5

Published date

19 July 2021

Closing date

26 July 2021

Closing time

11pm

Contract start date

2 August 2021

Contract end date

18 October 2021

Contract type

Supply contract

Procedure type

Open procedure (above threshold)

Any interested supplier may submit a tender in response to an opportunity notice.

This procedure can be used for procurements above the relevant contract value threshold.

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

No

Description

Aluminium Tool for Injection Mould

Tooling specification:
2 Imp Aluminium Hot runner tool. 6 drop hot runner tool. I suggest we would need to inject on the seen surface in the middle of the U channel as the part will tend to stick to the ribbed side. We may need to have cold sprues that we will need cut off due to the diameter of the hot runner drops.
Please include a mould flow as all the rib form needs to be full and the product needs to be flat and straight.
Ejection on the ribbed half. Additional ejection positions may need to be added for venting purposes
Approximate Tool Sizes 2000 x 750 (with 900 back plates) x 700 mould height

Both quotes to include:
1/ All delivery and collections of the tooling to and from the moulding company should there be any issues
2/ DME N9 water fittings and Harting Plugs
3/ 250 mm diameter location rings both halves
4/ Conventional machine ejection, M24 ejection connection flush with the Back Plate
5/ Sindanyo thermal insulation sheet on the fixed half of the tool

The supplier will be required to confirm an Expression of Interest and enter into a Non-Disclosure Agreement and will then be provided with a CAD drawing file (.x-t or .eprt) to price against. A week will be allowed for the completed tender sum to be returned after acceptance of the EOI.

More information

Attachments

About the buyer

Contact name

Julian Lovell

Address

The Paddocks,Home Farm Drive
BANBURY
OX156HU
England

Telephone

01295670990

Email

julian.lovell@equipegroup.com

Website

www.equipegroup.com