UK SBS PR16274 Multi-Channel Fibre Optics Distributed Temperature Measurement System

Contract summary

Industry

• Optical-fibre cables for data transmission - 32562300

Location of contract

OX11 0QX

Value of contract

£75,000

Procurement reference

UK SBS PR16274 Multi-Channel Fibre Optics Distributed Temperature Measurement System

Published date

21 March 2018

Closing date

21 February 2017

Contract start date

27 February 2017

Contract end date

26 February 2018

Contract type

Supply contract

Procedure type

Open procedure

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

No

---

Description

STFC - Daresbury Laboratory is currently constructing the CLARA electron particle accelerator, as part of the development programme for a future UK FEL (Free electron laser).

This specification is concerned with the supply only of a multi-channel fibre optic distributed temperature measurement system, which is required to provide very accurate temperature monitoring within the CLARA accelerator enclosure. Once installed by our technical staff, the system must be able to sense the temperature at one meter intervals along the length of commercially available fibre optic cables (separately procured and installed by us), ideally, using the principles of Raman back scattering. Although this system, including the fibres, will be installed by us we would expect access to technical support during the installation/commissioning phase.

This system will provide diagnostic information to the machine operators and will provide feedback to the air conditioning system which is controlling the area temperature to 23°C +/- 0.1°C.

The equipment specification and the following requirements should be considered to be the minimum acceptable standards.

The delivered system must use a fibre optic cable as the sensor to satisfy the following parameters:
Supply voltage 220~240 V
Temperature resolution 0.01 to 0.03°C
Measurement distance (fibre optic cable length for each channel) 10 km per channel (Minimum)
Sampling interval along the length of the fibre 1m (Maximum)
Measurement range -200°C to +200°C
Number of sensor channels (number of fibre optic cables that can be used) 16 (Minimum)
Interface RS232 (Modbus), Ethernet (Modbus)
Must integrate to EPICS (Scientific SCADA package) to allow the control of sensor start point with analysis of temperature and fibre attenuation.
Sensor Non-specialist, commercially available, optical fibre
Laser safety Class 1M (Maximum)
Visualisation software All software must be supplied that is required to set up, control and visualise data on a PC via Ethernet.
Ability to produce graphs and analyse data from anywhere on the network.

Pricing

Supply of the system (GBP) inclusive of all necessary accessories to meet our requirements; including Carriage and some limited access to technical support during the installation/commissioning process. The system must be delivered by mid-March 2017.

Build Standards

You are to confirm the equipment build standards conform to with the essential requirements of the relevant European health, safety and environmental protection legislation and must be CE marked.

Health and Safety Policy

A copy of the company's current Health and Safety policy is to be submitted.

Environmental Policy

A copy of the company's current Environmental policy is to be submitted.

---

More information

Previous notice about this procurement

UK SBS PR16274 Multi-Channel Fibre Optics Distributed Temperature Measurement System

• Opportunity
• Published 30 January 2017

---

Award information

Awarded date

8 March 2017

Contract start date

9 March 2017

Contract end date

8 March 2018

Total value of contract

£49,429

This contract was awarded to 1 supplier.

YOKOGAWA UNITED KINGDOM LIMITED

---

About the buyer

Contact name

Fiona Morris

Address

UK Shared Business Services Limited
Polaris House, North Star Avenue
Swindon
SN2 1FF
England

Email

majorprojects@uksbs.co.uk