Published date: 14 June 2024

Last edited date: 27 June 2024

Closed opportunity - This means that the contract is currently closed. The buying department may be considering suppliers that have already applied, or no suitable offers were made.


Closing: 5 July 2024, 5pm

Contract summary

Industry

  • Racking - 39151100

Location of contract

SW7 2DD

Value of contract

£0 to £100,000

Procurement reference

IT-492-1388-SCM3373M

Published date

14 June 2024

Closing date

5 July 2024

Closing time

5pm

Contract start date

1 August 2024

Contract end date

31 July 2027

Contract type

Service contract

Procedure type

Open procedure (below threshold)

Any interested supplier may submit a tender in response to an opportunity notice.

This procedure can be used for procurements below the relevant contract value threshold.

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

No

Description

SMG wishes to appoint a supplier for inspection of racking and shelving. The company should be an approved SEMA (Storage Equipment Manufacturers Association) inspector or SARI. The inspections will be required at all the sites within SMG.
The below definition explains what SMG considers to be racking:
o Any type of framework of fixed or adjustable design which supports a load without the use of shelves (e.g., pallet racking)
o Contains mechanical components/moving parts in the storage system (mechanical racking).
o Stillages
All other storage systems may be considered shelving or bookshelves.
To ensure certain types of shelving are suitable for purpose, SMG have also deemed there to be a category of enhanced inspection shelving. This shelving is defined as:
o Shelving which supports loads whereby one person could not comfortably lift the loads without assistance (based on manual handling guidelines) or the use of equipment such as ladders.
o Extensive large shelving which supports a lot of material/stock
The service should be on an annual basis unless the inspection results dictate otherwise.
The appointed supplier will undertake a full asset verification during the first visit to each location, and throughout the contract, maintain an up-to-date asset list, adding and removing items as required. Access to the asset list, inspection reports, recommendations etc via a web portal/electronic system.
The supplier should be independent from any racking manufacturer and be able to inspect all the types of racking as outlined above.
The inspection should include all elements required under the relevant legislation, SEMA guidelines and best practices. In addition, identify if and where safe working load or SEMA notices are required, check existing signage for correct details and locations. Where the safe working load notices are missing, or the racking is historic in nature the safe load must be determined and notified to SMG.
Where defects are noticed during the inspection the report must highlight this along with a time period for the repair. Any defects leading to serious safety risk should be notified to the local Estates Team immediately along with the required actions. Where defects are noted, a quote should follow to undertake the repairs. SMG will not be obliged to act on this quote.
Some of the SMG sites are very large with asset locates across different buildings and numerous floors, the time and to travel within the site must be included.
Access to site will be facilitated by the local Estates Team, and all site attendance must be coordinated through them. The inspections will take place during normal business hours 07.00 - 19.00. Public areas are to be inspected outside of museum operational hours of 10.00 - 18.00. To enable this, a program needs to be developed for the inspections at each site. There must be flexibility for events, breakdowns, maintenance etc within the program as an ...

More information

Links

Additional text

You can view our tender documents and apply for the opportunity here: https://in-tendhost.co.uk/sciencemuseumgroup/aspx/Home

Is a Recurrent Procurement Type? : No

About the buyer

Contact name

Orla Gardner

Address

Exhibition Road
South Kensington
London
SW7 2DD
United Kingdom

Telephone

02079424000

Email

Orla.Gardner@Railwaymuseum.org.uk

Website

https://www.sciencemuseumgroup.org.uk