Published date: 20 October 2025

Open opportunity - This means that the contract is currently active, and the buying department is looking for potential suppliers to fulfil the contract.


Closing: 3 November 2025, 12pm

Contract summary

Industry

  • Construction work - 45000000

Location of contract

Scotland

Value of contract

£1,000,000

Procurement reference

tender_509686/1525677

Published date

20 October 2025

Closing date

3 November 2025

Closing time

12pm

Contract start date

5 January 2026

Contract end date

1 April 2026

Contract type

Works

Procedure type

Restricted procedure (above threshold)

A two-stage procedure, where the first stage is used to select suppliers, who are then invited to bid in the second stage.

This procedure can be used for procurements above the relevant contract value threshold.

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

No

Description

In approx. 12 buildings at Cameron Barracks located in Inverness the following works will be required but not limited to: Removal of safeguarding adaptions
Removal of safeguarding adaptions i.e. pipe boxing, stairwell protection, boxing around services and servers. Once removed all redundant material should be disposed of from site. Working around and moving building fixtures, fittings & furniture to allow the works to take place. cataloguing of existing pictures, decorations, furniture, signs and stickering to ensure they are put back in original locations upon completion. Clean each building prior to redecorating works commencing, floors, walls ceilings, doors, windows skirtings, radiators, fixtures and fittings to remove dust, grease and cobwebs, and surface contaminants. Removal of all existing pictures, decorations, signs, notice boards etc. Prepare all surfaces ready for new decorations works by rubbing down all painted surfaces to remove loose flaking paintwork to provide a suitable key for new paint. Fill any cracks and holes using appropriate filler materials, once filler has set rub down and feather in to surrounding surfaces, finally remove all sanding dust and debris prior to applying paint. Prior to commencement of redecoration works ensure to protect all floors, furnishings, fittings and surfaces using clean dust sheets, masking tape and protective sheeting. All decorated surfaces should be finished to a uniform, clean, and even appearance. Apply a coat of primer/undercoat and two full coats of approved finish paint to all previously painted surfaces and three to coats to any bare surface. All paint to be applied in accordance with manufacturer's instructions and colours approved by the project manager. All stained timber elements painted with a suitable primer-sealer bond coat as required, then 2nr. coats of a colour matched stain. All existing carpet and Vinyl/Laminate floor coverings are to be removed and replaced with new, old coverings to be disposed offsite, substrate prepared as required ready to receive the new floor coverings, new coverings of carpet and Vinyl/Laminate to be agreed in conjunction with the site team and project manager.

More information

Links

How to apply

Follow the instructions given in the description or the more information section.

About the buyer

Address

Forthview House, 30 Hilton Road
Rosyth
KY11 2BL
Scotland

Telephone

+44 7345995841

Email

Alan.Caseby@landmarc.mod.uk

Website

https://www.landmarcsolutions.com/