Published date: 7 February 2017

Awarded contract - This means that the contract has been awarded to a supplier.


Closing: 31 January 2017

Contract summary

Industry

  • X-ray devices - 33111000

Location of contract

OX11 0DX

Value of contract

£50,000 to £60,000

Procurement reference

UK SBS PR17005/2

Published date

7 February 2017

Closing date

31 January 2017

Contract start date

7 February 2017

Contract end date

31 March 2017

Contract type

Supply contract

Procedure type

Open procedure

Any interested supplier may submit a tender in response to an opportunity notice.

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

No

Description

A customised readout board is required to readout 2 HEXITEC ASICs with CdTe based X-ray detectors. The readout board must:
• provide the 13 digital input clocks at 21.25MHz to program and readout the 2 ASICs simultaneously
• take the 8 analogue outputs with a voltage magnitude of 1.0V in the range of 0.5V to 2V at 21.25MHz
• automatically calculate the offset level per pixel and subtract the offset per pixel in real time
• output the data with 16bit precision from the 2 ASICs via LVDS with no more than 10LVDS pairs per board
• be triggered by software command or TTL trigger inputs
• have control signal input and environmental data output via UART
• temperature and humidity measurements must be made by components on the readout board
• provide low noise analogue power at 1.65V and 3.3V with a consumption of 0.2A and 0.5A per ASIC respectively
• operate from a single 12V power input
• route a high voltage line capable of withstanding a 1kV applied voltage
• align to a 34-way pin header per ASIC module with an accuracy of better than 10um to enable tiling of the 20.35x20.45mm modules to less than 50µm accuracy
• have a total width less than that of the two ASIC modules side by side (

More information

Previous notice about this procurement

Customised Modular Readout System

  • Opportunity
  • Published 23 January 2017, last edited 23 January 2017

Attachments

Additional text

As part of the strategic alliance between UK Shared Business Services Ltd (UK SBS) and Crown Commercial Service (CCS), UK SBS can use the CCS eSourcing Suite for future procurements.

If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'. Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so.

Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing Expressionofinterest@crowncommercial.gov.uk
Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email.
Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done.
The Sourcing documents can then be accessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents within Contracts Finder.

As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event. Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information.
For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service Helpdesk : Telephone: 0345 010 3503
Training documents to support Bidders utilise Emptoris CCS eSourcing are available in the Contracts Finder Tender documents section.

Award information

Awarded date

1 February 2017

Contract start date

3 February 2017

Contract end date

2 February 2018

Total value of contract

£59,917

This contract was awarded to 1 supplier.

aSpect Systems GmbH

Address

Eisenbahnstr. 2,
Dresden
Germany
01097

Reference

None

Supplier is SME?

No

Supplier is VCSE?

No

About the buyer

Contact name

Hannah McNeill

Address

Polaris House
Swindon
SN2 1EU
England

Email

majorprojects@uksbs.co.uk

Website

www.uksbs.co.uk