Published date: 7 April 2017
Awarded contract - This means that the contract has been awarded to a supplier.
Contract summary
Industry
Electrical machinery, apparatus, equipment and consumables; lighting - 31000000
Location of contract
OX11 0QX
Value of contract
£800,000 to £840,000
Procurement reference
UK SBS PR16107/2
Published date
7 April 2017
Closing date
26 January 2017
Contract start date
27 March 2017
Contract end date
26 March 2018
Contract type
Supply contract
Procedure type
Open procedure
Any interested supplier may submit a tender in response to an opportunity notice.
Contract is suitable for SMEs?
Yes
Contract is suitable for VCSEs?
No
Description
This requirement is for a pulsed power supply for the ISIS injection dipole. The new power supply will give a 15 kA pulsed output with a rise and fall time of 100 µs and a nominal flat top of 500 µs. The designated load is described in AW18-2. The supplier will specify the output cable to be used. The cable is expected to be a significant proportion of the load. The flat top, fall time and zero current stability of the pulsed output are critical to operational needs. A 'Start Trigger' will signal the beginning of the rise time. This will occur before the proton beam is present and is therefore of lower importance. The pulsed output is expected to be at operating current and stable by the time the beam is injected. A 'Stop Tigger' will then signal the beginning of the fall time. During this time the proton beam will be circulating in the synchrotron and passing through the magnets. The magnet current will fall to zero within 100 µs before acceleration of the protons begins. The current must then be stable at zero, when measured with no beam, for the remainder of the cycle. The power supply will be used at an operational facility and must have high performance, reliability and availability.
Award information
Awarded date
21 March 2017
Contract start date
27 March 2017
Contract end date
26 March 2018
Total value of contract
£800,000
This contract was awarded to 1 supplier.
Danfysik A/S
Address
Gregersensvej 8
DK-2630
TaastrupReference
None
Supplier is SME?
No
Supplier is VCSE?
No
Share this notice
Closing: 26 January 2017
All content is available under the
