Published date: 7 March 2022

Closed opportunity - This means that the contract is currently closed. The buying department may be considering suppliers that have already applied, or no suitable offers were made.


Closing: 30 March 2022, 5pm

Contract summary

Industry

  • Fencing wire - 44312000

  • Erection of fencing - 45342000

Location of contract

ME3 7SU

Value of contract

£0

Procurement reference

Predator fencing_Cliffe Pools

Published date

7 March 2022

Closing date

30 March 2022

Closing time

5pm

Contract start date

15 April 2022

Contract end date

1 February 2023

Contract type

Works

Procedure type

Open procedure (above threshold)

Any interested supplier may submit a tender in response to an opportunity notice.

This procedure can be used for procurements above the relevant contract value threshold.

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

Yes

Description

• Supply and install 5,000m anti-predator fencing and 5 gates. The following design principles are overarching:
o The overall fence height (including overhang) must be no more than 2m high but no less than 1.8m high.
o The apron must be:
 No less than 300mm when buried vertically in the ground.
o The netting mesh must comprise 50mm vertical spacing and 100mm horizontal spacing between wires i.e. 'otter' or 'predator' netting.
o The hinge on the netting to be placed at the top of the fence to create the overhang with crank brackets.
o Crank extension brackets must be no less than 400mm at 45 degrees.
o Gates are vehicle gates and must have/be:
 Fully meshed.
 Fitted with an overhang that finishes flush with the adjacent fence overhang.
 A concrete threshold no less than 400mm x 400mm x the width between gate posts and finished flush with ground level.
 Gap between the bottom of the gate and the threshold must be no more than 50mm.
• Whilst the specification is presented below, considering material supply issues, variation to the specification is acceptable. However, variation from the overarching design principles above is not acceptable.
• All works must be completed, and invoices received by the 1st of February 2023.

More information

Attachments

About the buyer

Contact name

Dan Satterthwaite

Address

The Lodge
SANDY
SG192DL
England

Email

central.procurement@rspb.org.uk