Published date: 25 October 2019

Awarded contract - This means that the contract has been awarded to a supplier.


Closing: 28 August 2019

Contract summary

Industry

  • Presses - 42636000

Location of contract

West Midlands

Value of contract

£50,000 to £60,000

Procurement reference

19-06

Published date

25 October 2019

Closing date

28 August 2019

Contract start date

16 September 2019

Contract end date

31 March 2020

Contract type

Supply contract

Procedure type

Open procedure (below threshold)

Any interested supplier may submit a tender in response to an opportunity notice.

This procedure can be used for procurements below the relevant contract value threshold.

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

Yes

Description

The University of Wolverhampton has been part funded by the European Regional Development Fund (ERDF) to deliver a Composites & Additive Layer Materials Engineering Research & Innovation Centre (CALMERIC) in the Marches, Stoke-on-Trent & Staffordshire and Greater Birmingham & Solihull Local Economic Partnership (LEP) areas.

The CALMERIC project supports SME's to conduct collaborative research and innovation projects in the field of advanced engineering materials with specialist staff based in the Centre established on Telford Innovation Campus of the University of Wolverhampton. In order to compliment and add to the University's facilities, the project requires a compression moulding press for use in the manufacture of composite test pieces and small mouldings, to be located at the Telford campus.

The Compression Moulding Press is primarily for the manufacture of flat plates of fibre reinforced composite material for test purposes in tooling mounted electrically heated platens. It may also be used for moulding components in other tooling mounted on the heated platens, or components in tooling that has integrated electrical heating installed in place of the heated platens. The press will be used for moulding thermosetting plastic materials at a tool temperature below 200°C. Press force requirement is moderate, but flexible and programmable press closure profiles are required.

The Press must be suitable for use in a University environment. There is a height restriction in the room of 2.8 metres, and the access doors for installation purposes have height of 3.1 metres and width of 3.0 metres

More information

Previous notice about this procurement

19-06 Compression Moulding Press (for CALMERIC Project)

  • Opportunity
  • Published 24 July 2019

Links

Award information

Awarded date

18 October 2019

Contract start date

25 October 2019

Contract end date

31 March 2020

Total value of contract

£0

This contract was awarded to 1 supplier.

Hoefer Presstechnik GmbH

Address

Pramerstrasse 11
Taiskirchen
Oberösterreich
AUSTRIA

Reference

None

Supplier is SME?

Yes

Supplier is VCSE?

No

About the buyer

Contact name

all correspondence via BravoSolution

Address

Wulfruna Street
WOLVERHAMPTON
WV11LY
England

Email

procurement@wlv.ac.uk

Website

https://wlv.bravosolution.co.uk