Published date: 21 December 2017
Last edited date: 21 December 2017
This notice was replaced on 17 May 2018
This notice does not contain the most up-to-date information about this procurement. The most recent notice is:
Awarded contract (published 17 May 2018)
Closed opportunity - This means that the contract is currently closed. The buying department may be considering suppliers that have already applied, or no suitable offers were made.
Contract summary
Industry
Unmanned underwater vehicles - 35512400
Drilling rig - 43132200
Subsea equipment - 43135000
Location of contract
SO14 3ZH
Value of contract
£0 to £350,000
Procurement reference
UK SBS PR17092 Design, Construction and Pre-Deployment Testing of Seabed CO2 Gas Pipe Positioning Ri
Published date
21 December 2017
Closing date
7 February 2018
Contract start date
1 March 2018
Contract end date
31 December 2018
Contract type
Supply contract
Procedure type
Open procedure (above threshold)
Any interested supplier may submit a tender in response to an opportunity notice.
This procedure can be used for procurements above the relevant contract value threshold.
Contract is suitable for SMEs?
Yes
Contract is suitable for VCSEs?
No
Description
CLOSING TIME FOR BIDS IS 07/02/2018 14:00 HOURS. DO NOT APPLY DIRECTLY TO THE BUYER.
To express your interest in this opportunity email ExpressionOfInterest@crowncommercial.gov.uk.
To register on our e-sourcing portal click on https://gpsesourcing.cabinetoffice.gov.uk and follow the link "Register for CCS eSourcing"
Please disregard any content in this notice that requests your organisation "to apply directly to the buyer" as this unfortunately a system generated error, that is outside of the Contracting Authorities control
Please see attached for the full scope of works.
The contract will be awarded based on the criteria set out on the sourcing documents.
Tenders are invited for the design, construction and pre-deployment testing of a rig that can be deployed from a research vessel to the seabed in c.120 m depth in the North Sea. The rig will form part of a suite of instrumentation required to support the EU Horizon 2020 project "Strategies for Environmental Monitoring of Marine Carbon Capture and Storage" (STEMM-CCS) that is to be carried out in the North Sea during 2017 to 2019, and will specifically enable the controlled release of CO2 gas from a point 3 m below the seabed.
The purpose of the rig is to carry to the seabed, and then to position, a pipe or similar gas conduit within the seabed sediment with its outlet end at a position approximately 3 m below the seabed and oriented in a generally upward attitude. The inlet end will remain approximately 0.5 m above the seabed and at least 7 m distant from the buried outlet end. The lowest point of the pipe will be no less than 1 m below the outlet end (see figure 1). This is to ensure that the CO2 gas released from the outlet end will permeate upwards through the sediment and cannot track back along the path of the pipe.
More information
Additional text
-
DO NOT APPLY DIRECTLY TO THE BUYER
CLOSING TIME FOR BIDS IS 07/02/2018 14:00 HOURS.
Please disregard any content in this notice that requests your organisation "to apply directly to the buyer" as this unfortunately a system generated error, that is outside of the Contracting Authorities control
As part of the strategic alliance between UK Shared Business Services (UK SBS) and Crown Commercial Service (CCS), UK SBS can use the CCS eSourcing Suite for future procurements. If you have not yet registered on the eSourcing Suite, this can be done online at https://gpssourcing.cabinetoffice.gov.uk by following the link "Register for CCS eSourcing". Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation you are registering, who will be entering into a contract if invited to do so. Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing ExpressionOfInterest@crowncommercial.gov.uk. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email. Crown Commercial Service will process the email and then enable the bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done. The Sourcing documents can then be assessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents with Contracts Finder.
About the buyer
Contact name
Khush Vadher
Address
North Star Avenue
Swindon
SN2 1FF
England
Share this notice
All content is available under the
