Published date: 20 October 2020
Awarded contract - This means that the contract has been awarded to a supplier.
Contract summary
Industry
Medical gases - 24111500
Location of contract
NN16 8UZ
Value of contract
£40,000 to £60,000
Procurement reference
KETT001-DN465205-47680934
Published date
20 October 2020
Closing date
22 April 2020
Closing time
12pm
Contract start date
2 November 2020
Contract end date
30 June 2021
Contract type
Service contract
Procedure type
Open procedure (below threshold)
Any interested supplier may submit a tender in response to an opportunity notice.
This procedure can be used for procurements below the relevant contract value threshold.
Contract is suitable for SMEs?
Yes
Contract is suitable for VCSEs?
No
Description
A requirement of HTM02-01 and the Pressure System Safety Regulations is that the estates department should have accurate and up to date drawings of the MGPS showing main sections and branches, departments served, control valves, terminal units and alarm systems for each medical gas service. A schematic diagram of the installation should also be provided.
In addition to this each isolating valve and AVSU should be individually identified by a unique reference number. The appropriate reference number, corresponding to that shown on the drawings, should be displayed at or on each isolating valve. The drawing should indicate the type and make of terminal units.
The Trust therefore requires fixed costs for the following:
1. Provision of a full set of 'As-Fitted' drawings of the medical gas pipeline systems
2. A full set of schematic drawings of each medical gas system including AGSS
3. A full set of isometric drawings of each medical gas system including flow rates
4. Each isolating valve and AVSU to be fitted with a Traffolyte tag/label with a unique reference number and in accordance to HTM02-01 Appendix K.
5. Install new valve locks to existing Line valves.
6. Verify all existing AVSU keys and replace any missing as required.
7. Provide 2 x new key cabinets (1 x for AVSU and 1 x for Line Valves) complete with an AVSU and Valve schedule. The schedule should correspond to AVSU & valve numbers entered on the drawings.
8. Marked up department drawings at each AVSU showing what is connected to the AVSU's to assist with emergency situations/shut downs
Award information
Awarded date
16 October 2020
Contract start date
2 November 2020
Contract end date
30 June 2021
Total value of contract
£34,950
This contract was awarded to 1 supplier.
Johnson Purba Ltd
Address
57 Burton Street,
Sheffield,
S6 2HHReference
Companies House number: 07634328
Supplier is SME?
Yes
Supplier is VCSE?
No
About the buyer
Contact name
Gail Thorburn
Address
ROTHWELL ROAD
KETTERING
NN168UZ
England
Telephone
01536 491708
Share this notice
Closing: 22 April 2020, 12pm
All content is available under the
