Published date: 18 May 2023
Awarded contract - This means that the contract has been awarded to a supplier.
Contract summary
Industry
Autoclaves - 33191110
Location of contract
LS18 5HD
Value of contract
£0
Procurement reference
LAB001LTU
Published date
18 May 2023
Closing date
2 May 2023
Closing time
10am
Contract start date
12 May 2023
Contract end date
8 September 2023
Contract type
Supply contract
Procedure type
Open procedure (below threshold)
Any interested supplier may submit a tender in response to an opportunity notice.
This procedure can be used for procurements below the relevant contract value threshold.
Contract is suitable for SMEs?
Yes
Contract is suitable for VCSEs?
Yes
Description
The university requires two autoclaves to be used for general laboratory biohazard waste disposal (fluids, plastics, agar plates, etc.). Both autoclaves shall:
• Be fully installed and commissioned by 8th September 2023
• Come with minimum 12-month warranty
• Come with maintenance contract
Main autoclave:
• Minimum sterilisation of 121 degrees for 15 minutes
• Minimum 200 litre capacity
• Plumbed in
• Square chamber
• Pre- and post-vacuum system
• Internal steam generator
• Steam jacket
• Vertical sliding door
• Water softener discard box
• Maximum External Dimensions of machine: Width = 760mm, Height = 1900mm, Depth = 1650mm (including pipework)
• Must fit through doorway entrance (both inner and outer doors): 770mm
Existing on-site services:
• Mains water supply
• 3 phase (63Amp) electrical power
• Drainage
Small autoclave:
• Minimum sterilisation of 121 degrees for 15 minutes
• Minimum 40 litre capacity with electrically heated elements.
• No plumbing requirements.
• Maximum External Dimensions of machine: Width = 600mm, Height = 725mm, Depth = 775mm
• Stand included to hold autoclave at a height of at least 900mm above floor.
The procurement will be conducted exclusively via the university's e-tendering website, where all documentation can be found and downloaded:
https://neupc.delta-esourcing.com/members/leeds-trinity-university/
Accessing a Tender Opportunity via the university's e-tendering website:
Once you have created a supplier profile, to respond to an opportunity, click 'Response Manager' or 'View Invites and Responses'. You will then be presented with a list of all opportunities your organisation has previously worked on and be given the option of viewing current invites or entering the access code to begin responding to a new opportunity
Note:
Project: LAB001LTU Autoclaves for Biomed
Opening Date : 06/04/2023 09:00
Closing Date : 02/05/2023 10:00
Access Code : 8429SB7Z35
More information
Previous notice about this procurement
LAB001LTU Autoclaves for Biomed
- Opportunity
- Published 6 April 2023
Award information
Awarded date
17 May 2023
Contract start date
18 May 2023
Contract end date
8 September 2023
Total value of contract
£55,365
This contract was awarded to 1 supplier.
LTE SCIENTIFIC LIMITED
Address
Greenbridge Lane,Greenfield
OLDHAM
Lancashire
OL3 7EN
GBReference
Companies House number: 02648370
Value of contract
£55,365
Supplier is SME?
Yes
Supplier is VCSE?
No
About the buyer
Contact name
Mark Hayter
Address
Brownberrie Lane,Horsforth
LEEDS
LS185HD
England
Telephone
01132837100
Share this notice
Closing: 2 May 2023, 10am