Published date: 16 August 2022
Closed early engagement
Contract summary
Industry
Mechanical engineering services - 71333000
Location of contract
SE7 8LX
Procurement reference
tender_312173/1093739
Published date
16 August 2022
Closing date
20 September 2022
Contract is suitable for SMEs?
Yes
Contract is suitable for VCSEs?
No
Description
The three Mirrlees Blackstone engines (ESL16 twin bank engine) installed at Thames Barrier are fast approaching their anticipated three- quarter life survey . The following inspections and component overhaul are proposed , in order to enable the engines to be suitable for a further 10-15-year period.
1. Nodal Damper Coupling (NDC) fluid level check
2. Gearbox bearing and final alignment verification
3. Cylinder Liner Nose O-ring Renewal
4. Liner deglazing and Piston Ring Pack replacement
5. Cylinder Head Decarbonising and Pressure Test
6. Jacket Water Pump.
7. Standard Service Procedures
Within procedures 1 - 6 carry out standard service work to include:
- Recalibration of fuel injectors (does not include nozzle replacement)
- Pressure testing of internal fuel system
- Renewal of lube oil filter elements (engine)
- Renewal of lube oil filter elements (gearbox)
- Renewal of fuel filter elements
- Re-setting of exhaust valve tappet clearances
- Visual Inspection of internal pipework
- Visual Inspection of camshaft assembly and drive gear train
- Visual Inspect all coolers and heat exchangers for external leakages
- Operational check and adjustment of mechanical overspeed
- Operational check and adjustment of decompression system
- Renewal of all crankcase and camshaft door joints
- Check and record crankshaft deflections
- Measure and record crankshaft end float
- Operational check and adjustment of internal and external fuel rack linkage
- Operational check of engine and gearbox lube oil pre-prime system
8. Recalibration of on engine sensors
9. Re-commissioning / load test
The engineer/s working on the project must have in-depth knowledge of ESL 16 twin bank engines, with proven evidence of experience. The successful supplier will provide spares when required, within a reasonable lead time.
The preferred supplier must be CTC (counter terrorist check) cleared prior to contract award.
About the buyer
Contact name
Lu
Address
Guildbourne House, Chatsworth Road,
Worthing,
BN11 1LD
England
Telephone
00
Share this notice
Closing date: 20 September 2022