UK SBS PR16212 Semiconductor High Power Solid-State Switch Prototype

Contract summary

Industry

• Switchgear - 31214000

Location of contract

OX11 0QX

Value of contract

£55,000 to £150,000

Procurement reference

UK SBS PR16212 Semiconductor High Power Solid-State Switch Prototype

Published date

17 October 2016

Closing date

31 October 2016

Contract start date

7 November 2016

Contract end date

31 March 2017

Contract type

Works

Procedure type

Open procedure

Contract is suitable for SMEs?

Yes

Contract is suitable for VCSEs?

No

---

Description

This requirement is for the production of a high power solid-state electrical switch prototype.

STFC would like to investigate the possibility of replacing their existing high power switches with a solid-state device. The full power device will require a hold-off voltage in the region of 60kV, conduction current of 8kA, 50Hz repetition rate and a switch on time less than 100ns.

It is expected that the development of a prototype switch will require research and development and that the stated performance will be theoretical, based on current knowledge.

The design of the prototype device will aim to have a hold-off voltage of 10kV, conduction current of 1kA, 50Hz repetition rate and a switch on time less than 100ns. A report will be produced that describes how the technology used in the prototype device can be scaled to provide the requirements of a full power device

---

More information

Attachments

• PR16212 ITQ Invitation to Quote .pdf
• PR16212 ITQ Invitation to Quote

Additional text

The section below will provide instructions on how to submit a bid for this procurement
The instructions are as follows;
UK Shared Business Services eSourcing as part of the strategic alliance between UK Shared Business Services Ltd (UK SBS) and Crown Commercial Service (CCS), UK SBS can use the CCS eSourcing Suite for future procurements.

If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'.

Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so.
Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing ExpressionOfInterest@ccs.gsi.gov.uk. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email.
Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite.
The registered user will receive a notification email to alert them once this has been done.
The Sourcing documents can then be accessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents within Contracts Finder.
As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event.

Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information.

For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service Helpdesk : Telephone: 0345 010 3503 Training documents to support Bidders utilise Emptoris CCS eSourcing are available in the Contracts Finder Tender documents section.

---

About the buyer

Contact name

Elizabeth Gage

Address

North Star House
North Star House
Swindon
SN2 1FF
England

Email

MajorProjects@uksbs.co.uk

Website

North Star House, North Star House