Published date: 11 April 2017
Closed opportunity - This means that the contract is currently closed. The buying department may be considering suppliers that have already applied, or no suitable offers were made.
Contract summary
Industry
Work benches - 39151200
Location of contract
Any region
Value of contract
£10,000 to £113,000
Procurement reference
BIP35117375
Published date
11 April 2017
Closing date
13 October 2015
Contract start date
23 November 2015
Contract end date
23 December 2015
Contract type
Supply contract
Procedure type
Open procedure
Any interested supplier may submit a tender in response to an opportunity notice.
Contract is suitable for SMEs?
Yes
Contract is suitable for VCSEs?
No
Description
Work benches. Quantity 2 Grinding Bench Assemblies. Each Assembly should be treated as one complete system and each System must have the following specifications:
a. IP65 Rating and be able to operate from 415v three phase 50hz supply.
b. A bench constructed in powder coated steel with a minimum working area of 1500mm in length, 650mm in width and 850mm high. The overall dimensions of the grinding bench shall be no more than 1800mm wide, 1000mm deep and working height 850mm high; overall height to be no more than 1800mm. Including rear and side protective screening.
c. A downdraft extraction facility with dust collection to facilitate simple disposal of aggregated dust; suction to be minimum of 1750m³/h.
d. A wet type filtration system with a collector for use when Aluminum grinding. The construction should be metal material with appropriate finishing. The collector should have anti-spark features, noise reduction, fluid level control, drain valve, sludge bin and be able to handle corrosion inhibitors.
About the buyer
Contact name
Maurice Litchmore
Address
Defence Commercial Commands & Centre Air
No 3 Site, Nimrod Building
High Wycombe
HP14 4UE
England
Telephone
+441494494373
Share this notice
Closing: 13 October 2015
All content is available under the
